Any known solution to the volume issue when you are talking on the phone? When it is noisy I can't hear the person I am speaking to.
...
Use the opcodes...
First, to enter the opcode screen, press Menu + 048263 + *.
This will bring you to a box prompting you for an opcode. Before you can enter any codes, it will be necessary to suspend the phone. To do this, enter 54* and press OK. The display will go black and the phone will be suspended. Press the camera button on the outside of your phone to turn the back-light back on. You should see "SUCCESS" on the screen.
5*0*0 Set audio level
5*0*1 Set audio level 1
5*0*2 Set audio level 2
5*0*3 Set audio level 3
5*0*4 Set audio level 4
5*0*5 Set audio level 5
5*0*6 Set audio level 6
5*0*7 Set audio level 7
5*0*8 Set audio level 8
5*0*9 Set audio level 9
5*0*10 Set audio level 10
5*0*11 Set audio level 11
5*0*12...
(continues)
...
Thanks,,,which is the Menu key? Do i hold it while I push 048263* ?
...
center top key between soft keys.
>>Do i hold it while I push 048263*
No, enter digits one after the other but you have to do them pretty quick for it to work otherwise you get passed to "Git It Now".
...
captmas said:
center top key between soft keys.
>>Do i hold it while I push 048263*
No, enter digits one after the other but you have to do them pretty quick for it to work otherwise you get passed to "Git It Now".
soon as i hit the 4 it takes me to G I N
...
menu zero not menu 4....
...
i did that ,i hit menu 0 4 ,and as soon as i hit 4 it goes to GIN
...
Hey I just got as far as success on the screen but nothing after that what next from success I went straight into 5*0*15 after that what is the correct entry
...
just hit "back" (left soft key) and the phone will blank and reset.
...
Acutally, it is the "end" key, sorry. 🙂 Just did it on the demo...
...
Thanks for the help. Has anyone actually had noticeable improvement to the earpiece volume with this change? When it was discussed before, I heard mixed reviews.
...
I keep attempting to do this and when I press the End button it will just bring me back to the menu. I tried to hold the End button and i shut off the phone with no change. If I press o.k. I get a error 3 message, I thank anybody for their help with this.
...
I'm stuck on this step too. I press in the 5*0*15* code and then try to push end and nothing happens. Can you describe this step a little bit more???? Thanks, Jen
...
from the Opt screen enter in 54*5*0*15, I did this and got no change but the phone stated it was successful. Good luck 🙂
...
Worked great for me. the phone was useless untill I did it.
...
ive done it as well i tried to show people how to do it earlier but they kept having problems.... anyway it works MUCH better and now i can drive with my window down and still hear the call clearly!
...
>>i did that ,i hit menu 0 4 ,and as soon as i hit 4 it goes to GIN
That was happening to me too. You've got to do it in one quick, smooth motion to not trigger GIN.
Memorize the numbers and enter the string all at once, no stopping. That's how it worked for me.
...
same here I go to one of the menu items anyone had any success with this process
...
I must be doing something wrong my screen will not change too fast too slow what is your guess
...
I got to this part:
You should see "SUCCESS" on the screen.
But in order to enter the code, I had to hit the back key. This allowed the screen to receive my text entry. Was that the right sequence or did I miss something? I've yet to receive a call or call out to really check it. It might be hard to determine. I tried to set it to 10.
...
Thank you !!! It worked. Not very loud but a lot better. I really appreciate your help!
...
I get as far as the "success" screen following the 54* and the outside camera button. After that point, nothing seems to happen. What are the exact steps I need to do at that point? Thanks for your help! 😁
...
right soft key (I think, i'm out of the kiosk, whichever softkey is "affirmative" sounding. then it'll take oyu back to the opcode screen where you can continue.
...
Thanks. I'll give it a try. 🙂
...
ya but no real change in volume, has anyone figured out how to hack the SEEM file like in P2kman, I can not get it to recognize my V710 or maybe someone has figured out the PST solution
Let me and all fo us know
...
I noticed a definite change in volume. It's still not as loud as some other phones, but 5 is now as loud as 7 used to be. 🙂
...
So does that mean that 7 is even louder?
...
Yes. When you're connected to a call, use the left up/down side keys to adjust the volume.
...
ok one final question
After you enter the OPT Code and Get Success, what key do you hit to get out of the menu and make sure the OPT Code took
If you hit back and Cancel does that not take out what you just did for the OPT Code
Please advise and thanks
...
OP codes are "performed" as soon as you hit ok, so if you hit cancel all it does is reset the phone with the new settings.
...