Sony Ericsson Z500
Replying to: DATA Cable Connection by jtyates533
Re: DATA Cable Connection
Install the driver from the location rather then downloading it.(There is a reason why, but it would take forever to explain)
once the driver is installed plug in you cable to your USB port. If you are running windows xp it find and install the device automatically. after the device is installed go to control panel-system-click hardware tab-device manager. When the device manager is open go down to "ports" and expand it. It should show "prolific usb to Sella comm port"
and in ( ) it will show the exact comm port that the device is connected to. You will need to know the comm port. Once you establish the comm port go back to the control panal, and look for the "phone monitor options" icon. Open that and click on the comm ports tab..Find the comm port that your device is connected to enable that comm port. Now your USB-11 cable is ready for use..However you need additional software. You can download sony ericsson's file manager from their site or a better on is found at http://fma.sourceforge.net/...It is called floats mobile agent...Download and itstall it. You will have to follow the instructions on using it, because I am a beginner myself...
Hope this helps
- Re: DATA Cable Connection by spider0526